Wie auf Backup-Button einer externen Platte reagieren?

[himitsu]

Im Gerätemanager sieht es nicht so aus, als wenn da was verdächtiges/interessantes zu finden sei.

Ich hoffe das ist das Richtige (auch wenn MaxPower nicht stimmen kann).

Code:

Device Descriptor:
bcdUSB:             0x0200
bDeviceClass:         0x00
bDeviceSubClass:      0x00
bDeviceProtocol:      0x00
bMaxPacketSize0:      0x40 (64)
idVendor:           0x152D
idProduct:          0x2335
bcdDevice:          0x0100
iManufacturer:        0x01
0x0409: "JMicron"
iProduct:             0x02
0x0409: "USB to ATA/ATAPI Bridge"
iSerialNumber:        0x05
0x0409: "3BA27512311A"
bNumConfigurations:   0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed:     High
Device Address:       0x03
Open Pipes:              2

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:        Bulk
wMaxPacketSize:     0x0200 (512)
bInterval:            0x00

Endpoint Descriptor:
bEndpointAddress:     0x02  OUT
Transfer Type:        Bulk
wMaxPacketSize:     0x0200 (512)
bInterval:            0x00

Configuration Descriptor:
wTotalLength:       0x0020
bNumInterfaces:       0x01
bConfigurationValue:  0x01
iConfiguration:       0x04
0x0409: "USB Mass Storage"
bmAttributes:         0xC0 (Bus Powered Self Powered )
MaxPower:             0x01 (2 Ma)

Interface Descriptor:
bInterfaceNumber:     0x00
bAlternateSetting:    0x00
bNumEndpoints:        0x02
bInterfaceClass:      0x08
bInterfaceSubClass:   0x06
bInterfaceProtocol:   0x50
iInterface:           0x06
0x0409: "MSC Bulk-Only Transfer"

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:        Bulk
wMaxPacketSize:     0x0200 (512)
bInterval:            0x00

Endpoint Descriptor:
bEndpointAddress:     0x02  OUT
Transfer Type:        Bulk
wMaxPacketSize:     0x0200 (512)
bInterval:            0x00