S.M.A.R.T. bei SATA?

[Horst0815]

http://www.delphipraxis.net/72013-sm...rte-lesen.html sollte dir helfen

[hathor]

SMARTAppD7.exe

Unable to open physical drive, error code: 0x00000005 (Zugriff verweigert)

WIN 7 64Bit

[Horst0815]

Macht´s bei mir nur beim CD Laufwerk

Code:

SMART interface opened...
DFP_GET_VERSION returned:
    bVersion        = 1
    bRevision       = 1
    fCapabilities   = 0x00000007
    bReserved       = 0x0
    bIDEDeviceMap   = 0x1
SMART enabled on drive: 0
     cbBytesReturned: 16
Drive 0 is an IDE Hard drive that supports SMART
    #Cylinders: 16383, #Heads: 16, #Sectors per Track: 63
     IDE TASK FILE REGISTERS:
          bFeaturesReg     = 0x0
          bSectorCountReg  = 0x1
          bSectorNumberReg = 0x1
          bCylLowReg       = 0x0
          bCylHighReg      = 0x0
          bDriveHeadReg    = 0xA0
          Status           = 0xEC
     Model number: KINGSTON SNVP325S264GB                 
     Firmware rev: AGYA020 
     Serial number:         30AS10GWT72
   cbBytesReturned: 528
Data for Drive Number 0
Attribute Structure Revision          Threshold Structure Revision
             16                                      16

_______________________________________________________________________________________
        -Attribute Name-            -Value-   -Worst-   -Threshold-  -Raw Value-
_______________________________________________________________________________________
01 Raw Read Error Rate                100       097         00         000
02 Throughput Performance             100       100         50         000
03 Spin Up Time                       100       100         50         000
05 Reallocated Sector Count           100       100         50         000
07 Seek Error Rate                    100       100         50         000
08 Seek Time Performance              100       100         50         000
09 Power On Hours Count               100       100         00         044
0A Spin Retry Count                   100       100         50         000
0C Power Cycle Count                  100       100         00         124
A7 Unknown or No Attribute Here       100       100         00         000
A8 Unknown or No Attribute Here       100       100         00         001
A9 Unknown or No Attribute Here       100       100         10         200
AA Reserve Block Count                100       100         10         098
AD Unknown or No Attribute Here       100       100         00         209
AF Unknown or No Attribute Here       100       100         10         000
C0 Power-off Retract Count            100       100         00         167
C2 Temperature                        066       042         30         034
F0 Head Flying Hours                  100       100         50         000
_______________________________________________________________________________________



SMART interface opened...
DFP_GET_VERSION returned:
    bVersion        = 1
    bRevision       = 1
    fCapabilities   = 0x00000007
    bReserved       = 0x0
    bIDEDeviceMap   = 0x4
SMART enabled on drive: 2
     cbBytesReturned: 16
Drive 2 is an IDE Hard drive that supports SMART
    #Cylinders: 16383, #Heads: 16, #Sectors per Track: 63
     IDE TASK FILE REGISTERS:
          bFeaturesReg     = 0x0
          bSectorCountReg  = 0x1
          bSectorNumberReg = 0x1
          bCylLowReg       = 0x0
          bCylHighReg      = 0x0
          bDriveHeadReg    = 0xA0
          Status           = 0xEC
     Model number: SAMSUNG HM641JI                        
     Firmware rev: 2AJ1000 
     Serial number: S26XJ1LZ900160      
   cbBytesReturned: 528
Data for Drive Number 2
Attribute Structure Revision          Threshold Structure Revision
             16                                      16

_______________________________________________________________________________________
        -Attribute Name-            -Value-   -Worst-   -Threshold-  -Raw Value-
_______________________________________________________________________________________
01 Raw Read Error Rate                100       100         51         020
02 Throughput Performance             252       252         00         000
03 Spin Up Time                       091       088         25         201
04 Start/Stop Count                   098       098         00         174
05 Reallocated Sector Count           252       252         10         000
07 Seek Error Rate                    252       252         51         000
08 Seek Time Performance              252       252         15         000
09 Power On Hours Count               100       100         00         082
0A Spin Retry Count                   252       252         51         000
0B Recalibration Retry Count          099       099         00         189
0C Power Cycle Count                  099       099         00         219
BF G-sense Error Rate                 100       100         00         164
C0 Power-off Retract Count            252       252         00         000
C2 Temperature                        064       054         00         036
C3 Hardware ECC Recovered             100       100         00         000
C4 Reallocation Event Count           252       252         00         000
C5 Current Pending Sector Count       252       252         00         000
C6 Uncorrectable Sector Count         252       252         00         000
C7 UltraDMA CRC Error Count           200       200         00         000
C8 Multi-Zone Error Rate              100       100         00         102
DF Load/Unload Retry Count            099       099         00         189
E1 Load/Unload Cycle Count            095       095         00         191
_______________________________________________________________________________________



Unable to open physical drive, error code: 0x00000002 (Das System kann die angegebene Datei nicht finden)

[Assarbad]

Zitat von hathor:

SMARTAppD7.exe

Unable to open physical drive, error code: 0x00000005 (Zugriff verweigert)

WIN 7 64Bit

Elevated?

Zitat von Horst0815:

Macht´s bei mir nur beim CD Laufwerk

[...]

Unable to open physical drive, error code: 0x00000002 (Das System kann die angegebene Datei nicht finden)

Eher weniger. Fehler 2 ist ein anderer Fehler und die Ursache ist dann auch eine andere.

[hathor]

Zitat von hathor:

SMARTAppD7.exe

Unable to open physical drive, error code: 0x00000005 (Zugriff verweigert)

WIN 7 64Bit

OK - als Administrator (Rechtsklick: Als Administrator ausführen) gehts:

SMART interface opened...
DFP_GET_VERSION returned:
bVersion = 1
bRevision = 1
fCapabilities = 0x00000007
bReserved = 0x0
bIDEDeviceMap = 0x1
SMART enabled on drive: 0
cbBytesReturned: 16
Drive 0 is an IDE Hard drive that supports SMART
#Cylinders: 16383, #Heads: 16, #Sectors per Track: 63
IDE TASK FILE REGISTERS:
bFeaturesReg = 0x0
bSectorCountReg = 0x1
bSectorNumberReg = 0x1
bCylLowReg = 0x0
bCylHighReg = 0x0
bDriveHeadReg = 0xA0
Status = 0xEC
Model number: SAMSUNG HM641JI
Firmware rev: 2AJ1000
Serial number: xxxxxxxxxx
cbBytesReturned: 528
Data for Drive Number 0
Attribute Structure Revision Threshold Structure Revision
16 16

__________________________________________________ _____________________________________
-Attribute Name- -Value- -Worst- -Threshold- -Raw Value-
__________________________________________________ _____________________________________
01 Raw Read Error Rate 100 100 51 000
02 Throughput Performance 252 252 00 000
03 Spin Up Time 092 091 25 056
04 Start/Stop Count 100 100 00 112
05 Reallocated Sector Count 252 252 10 000
07 Seek Error Rate 252 252 51 000
08 Seek Time Performance 252 252 15 000
09 Power On Hours Count 100 100 00 224
0A Spin Retry Count 252 252 51 000
0B Recalibration Retry Count 100 100 00 122
0C Power Cycle Count 100 100 00 165
BF G-sense Error Rate 100 100 00 081
C0 Power-off Retract Count 252 252 00 000
C2 Temperature 064 050 00 035
C3 Hardware ECC Recovered 100 100 00 000
C4 Reallocation Event Count 252 252 00 000
C5 Current Pending Sector Count 252 252 00 000
C6 Uncorrectable Sector Count 252 252 00 000
C7 UltraDMA CRC Error Count 200 200 00 000
C8 Multi-Zone Error Rate 100 100 00 003
DF Load/Unload Retry Count 100 100 00 122
E1 Load/Unload Cycle Count 100 100 00 201
__________________________________________________ _____________________________________



SMART interface opened...
DFP_GET_VERSION returned:
bVersion = 1
bRevision = 1
fCapabilities = 0x00000007
bReserved = 0x0
bIDEDeviceMap = 0x4
SMART enabled on drive: 2
cbBytesReturned: 16
Drive 2 is an IDE Hard drive that supports SMART
#Cylinders: 16383, #Heads: 16, #Sectors per Track: 63
IDE TASK FILE REGISTERS:
bFeaturesReg = 0x0
bSectorCountReg = 0x1
bSectorNumberReg = 0x1
bCylLowReg = 0x0
bCylHighReg = 0x0
bDriveHeadReg = 0xA0
Status = 0xEC
Model number: SAMSUNG HN-M101MBB
Firmware rev: 2AR1000
Serial number: xxxxxxxxxx
cbBytesReturned: 528
Data for Drive Number 2
Attribute Structure Revision Threshold Structure Revision
16 16

__________________________________________________ _____________________________________
-Attribute Name- -Value- -Worst- -Threshold- -Raw Value-
__________________________________________________ _____________________________________
01 Raw Read Error Rate 100 100 51 000
02 Throughput Performance 252 252 00 000
03 Spin Up Time 089 089 25 123
04 Start/Stop Count 100 100 00 143
05 Reallocated Sector Count 252 252 10 000
07 Seek Error Rate 252 252 51 000
08 Seek Time Performance 252 252 15 000
09 Power On Hours Count 100 100 00 156
0A Spin Retry Count 252 252 51 000
0B Recalibration Retry Count 100 100 00 006
0C Power Cycle Count 100 100 00 132
B5 Program Fail Count 100 100 00 081
BF G-sense Error Rate 100 100 00 001
C0 Power-off Retract Count 252 252 00 000
C2 Temperature 064 063 00 034
C3 Hardware ECC Recovered 100 100 00 000
C4 Reallocation Event Count 252 252 00 000
C5 Current Pending Sector Count 252 252 00 000
C6 Uncorrectable Sector Count 252 252 00 000
C7 UltraDMA CRC Error Count 200 200 00 000
C8 Multi-Zone Error Rate 100 100 00 000
DF Load/Unload Retry Count 100 100 00 006
E1 Load/Unload Cycle Count 096 096 00 051
__________________________________________________ _____________________________________

Unable to open physical drive, error code: 0x00000002 (Das System kann die angegebene Datei nicht finden)

2 SATA-LW im Notebook.
Das letzte ist dann sicher vom DVD-LW...